Home > LED Drivers > Constant Current >

ERP PKB 30 Watt Constant Current LED Driver

ERP PKB30W-1050-55-TD constant current led driver


 
Alternative Views:


MPN: PKB30W-1050-55-TD

Download Data Sheet

Our Price: $33.95


Availability:: In Stock
Product Code: PKB30W-1050-55-TD

Description Certifications
 

PKB30W-1050-55-TN - 30 watt constant current programmable led driver, 120 & 277V Input, 275-1050mA current output, max power 30 watts, class 2, 0/10V dimming protocol.

FEATURES

• UL Class P

• Class 2 output

• Lifetime: 5 years @ Tc ≤ 75°C

• 90℃ maximum case hot spot temperature

• Surge protection:

• IEC61000-4-5: 2 kV line to line/2 kV line to earth

• 2.5 kV ring wave: ANSI/IEEE c62.41.1-2002 & c62.41.2-2002

category A

• Complies with ENERGY STAR®, DLC (DesignLight Consortium®), and CA Title 24 technical requirements

PROGRAMMING

• Audio jack programming

• Current: see page 2 for current range

• 0-10V dimming profiles: Linear, Non-linear, Logarithmic
• Data log read: SKU, S/N, lot code, hours of operation, FW rev., power cycles

APPLICATIONS
• Commercial & residential lighting

• Architectural lighting
• Indoor Lighting

Technical Data

3 - INPUT SPECIFICATION (@25°C ambient temperature)



Units

Minimum

Typical

Maximum

Notes


Input Voltage Range (Vin)


Vac


90


120, 277


305

The rated output current for each model is achieved at Vin≥108 Vac, & at Vin≥249 Vac.

At nominal load


Input Frequency Range


Hz


47


50/60


63


Input Current (Iin)

A



0.7 A @ 120 Vac

0.34 A @ 277 Vac


Power Factor (PF)


0.9

> 0.9


At nominal input voltage (120 & 277 Vac)

From 100% to 50% of output power

Inrush Current

A

Meets NEMA-410 requirements

At any point on the sine wave and 25°C


Leakage Current


mA



0.4 mA @ 120 Vac

0.75 mA @ 277 Vac


Measured per IEC60950-1

Input Harmonics

Complies with IEC61000-3-2 for Class C equipment


Total Harmonics Distortion (THD)





20%

At nominal input voltage (120 & 277 Vac)

From 100% to 50% of output power

Complies with DLC (Design Light Consortium) technical requirements

Efficiency

%

-

up to 90%

-

Measured with nominal input voltage, a full sinusoidal wave form and without dimmer attached.

Isolation

The AC input to the main DC output is isolated.


4 - MAIN OUTPUT SPECIFICATION (@25°C ambient temperature)



Units

Minimum

Typical

Maximum

Notes

Output Voltage (Vout)

Vdc




See ordering information for details


Output Current (Iout)


mA




See ordering information for details

Output voltage and current combination cannot exceed max power output. See page 3 for operating window

The rated output current for each model is achieved at Vin≥108 Vac & Vin≥249 Vac.

Output Current Regulation

%

-5

±2.5

5

At nominal AC line voltage (120 & 277 Vac)

Includes load and current set point variations

Output Current Overshoot

%

-

-

20

The driver does not operate outside of the regulation requirements for more than 500 ms during power on with nominal LED load and without dimmer.

Ripple Current

≤ 20% of rated output current for

each model

Measured at nominal LED voltage and nominal input voltage without dimming

Calculated in accordance with the IES Lighting Handbook, 9th edition


Dimming Range (% of Iout)


%


1



100

The dimming range is dependent on each specific dimmer. It may not be able to achieve 1% dimming with some dimmers.

Dimming performance is optimal when the driver is operated at its nominal output voltage matching the LED nominal Vf (forward voltage). Dimming performance may vary when the driver is operated near its minimum output voltage.


Start-up Time


ms



300


500

Without any dimmer attached, and at nominal input voltages and nominal load

Measured from application of AC line voltage to 100% light output

Complies with ENERGY STAR® luminaire specification and CA Title 24

Isolation

The main DC output is certified and tested per UL8750 Class 2 or LED Class 2. In "-TD" models, the 0-10 V

dimming circuit is isolated from the AC input and the DC output


Share your knowledge of this product. Be the first to write a review »