Casambi Cloud Gateway | CGW-001-PSU / CGW-001-POE

The Casambi Cloud Gateway enables remote access and control of your Casambi lighting network over the internet. Available in two variants – PSU and PoE – it offers secure, encrypted communication, real-time monitoring, and full scene, group, and animation control directly from the Casambi App or connected system.

Key Features

• Two versions: CGW-001-PSU (Power Supply Unit) and CGW-001-POE (Power over Ethernet)
• Remote real-time control of Casambi networks
• Control individual luminaires, groups, scenes, and animations
• Adjust brightness, color temperature, hue, and saturation
• Supports creation of timers, groups, and scheduling via Casambi App
• Works with Casambi Evolution firmware
• Fully encrypted HTTPS connections – no incoming network traffic required
• For indoor use only

Connectivity & Interface

• Dual-band Wi-Fi: 2.4GHz / 5.0GHz (IEEE 802.11ac)
• Bluetooth 5.0 / BLE
• Gigabit Ethernet port
• USB-C power input (5V DC, min 3A)
• Power over Ethernet (PoE) enabled

Technical Specifications

• Processor: Broadcom BCM2711, Quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
• Memory: 4GB LPDDR4-3200 SDRAM
• Storage: Flash memory via dedicated SD card
• Operating Temp: 32–122°F (0–50°C) ambient
• Certifications: CE, FCC, IC, UK CA, KCC (Raspberry Pi 4 based)
• FCC ID: 2ABCB-RPI4B | IC: 20953-RPI4B

Security & Best Practices

• Initiates all outbound network traffic – no port forwarding required
• HTTPS encrypted connection for all data transmission
• Recommended: Install on a network isolated from critical infrastructure
• Store in a secure, temperature-controlled location