ERP PSB 30 Watt Constant Current LED Driver

Units

Minimum

Typical

Maximum

Notes

Input Voltage Range (Vin)

- PSBXXW models

Vac

90

120 & 277

305

The rated output current for each model is achieved at Vin≥108 Vac & at Vin≥249 Vac for PSBXXW models, and at Vin≥209 Vac for PSBXXE models.

At nominal load

- PSBXXE models

198

230

264

Input Frequency Range

- PSBXXW models

Hz

47

60

63

- PSBXXE models

47

50

53

Input Current (Iin)

A

0.5 A @ 120 Vac

0.28 A @ 230 Vac

0.23 A @ 277 Vac

Max Units on a 16 A Circuit Breaker

PSB30: 50 (120 Vac), 105 (230 Vac), 116 (277 Vac) units

PSB40: 39 (120 Vac), 82 (230 Vac), 90 (277 Vac) units

PSB50: 29 (120 Vac), 64 (230 Vac), 69 (277 Vac) units

The maximum number of units allowed per 16 A circuit breaker is based on worst-case conditions at 100% output.

Power Factor (PF)

0.9

> 0.9

At nominal input voltage and with nominal LED voltage

From 100% to 50% of rated power

Inrush Current

A

Meets NEMA-410 requirements

At any point on the sine wave and 25°C

Active limiting inrush current is available as an option. Please contact your ERP representative or send an email to [email protected].

LeakageCurrent

mA

0.3 mA @ 120 Vac

0.6 mA @ 230 Vac

0.7 mA @ 277 Vac

Measured per IEC60950-1

Input Harmonics

Complies with IEC61000-3-2 for Class C equipment

Total Harmonics Distortion (THD)

20%

At nominal input voltage and nominal LED voltage

From 100% to 50% of rated power

Complies with DLC (Design Light Consortium) technical requirements

Efficiency

%

-

up to 90%

-

Measured with nominal input voltage, a full sinusoidal wave form and without dimmer attached.

Isolation

The AC input to the main DC output is isolated.