Casambi BLE Lighting Supplies

Installation Make sure that the mains voltage is switched off when making any connections. Use 0,51,5 mm2 solid or stranded conductor electrical wires. Strip the wire 6-8 mm from the end.

Press the buttons on top of the dimmer case and insert the wires to the corresponding holes. Make sure to connect the input and output correctly. Input connector is marked with letters L and N, while the output connector is marked with letter N and a symbol with a wave and an arrow ( ).

If you install the dimmer into a heat sensitive environment (i.e. inside a luminaire or in a ceiling outlet box above a luminaire), make sure that the ambient temperature does not exceed the specified maximum value. Using the dimmer in a heat sensitive environment may limit the maximum output power

CBU-DCS is a Bluetooth controllable, Casambi enabled DALI controller. CBU-DCS does not have its own power supply. Instead, it is powered directly from a DALI bus. CBU-DCS can be used with a DALI sensor for presence detection or daylight harvesting, or it can be used for controlling DALI drivers that have an integrated DALI bus power supply. When used with drivers it supports range of options, including Device Type 6, Device Type 8, Tunable white control and RGB control. CBU-DCS has two sets of connectors. These connectors are internally connected in parallel with each other. This way the DALI bus can be routed through the product for easy installation. The Casambi app can be downloaded free of charge from Apple App Store and Google Play Store. Different Casambi enabled products can be used as a simple one luminaire direct control to a complete and full featured light control system where up to 127 units form automatically an intelligent mesh network.

eldoLED Quality of Light, wireless lighting control through Casambi, and Bluetooth Low Energy (BLE) beaconing from one digitally
integrated BLE radio-LED driver package! The radio's LEDcode2 connection allows for easy, 2-wire digital integration with eldoLED
LED drivers in a luminaire system. The radio - LED driver combination enables seamless integration in a Casambi BLE lighting control
flood network.
Integration and certification is easy thanks to the 2-wire, lowvoltage LEDcode2 connection.

eldoLED Quality of Light, wireless lighting control through Casambi, and Bluetooth Low Energy (BLE) beaconing from one digitally
integrated BLE radio-LED driver package! The radio's LEDcode2 connection allows for easy, 2-wire digital integration with eldoLED
LED drivers in a luminaire system. The radio - LED driver combination enables seamless integration in a Casambi BLE lighting control
flood network.
Integration and certification is easy thanks to the 2-wire, lowvoltage LEDcode2 connection.

eldoLED Quality of Light, wireless lighting control through Casambi, and Bluetooth Low Energy (BLE) beaconing from one digitally
integrated BLE radio-LED driver package! The radio's LEDcode2 connection allows for easy, 2-wire digital integration with eldoLED
LED drivers in a luminaire system. The radio - LED driver combination enables seamless integration in a Casambi BLE lighting control
flood network.
Integration and certification is easy thanks to the 2-wire, lowvoltage LEDcode2 connection.

CBU-A2D is a Bluetooth controllable, Casambi enabled 2 channel 0-10V/DALI controller. CBU-A2D has a universal 100-277 VAC input voltage range.

CBU-PWM4 is a Bluetooth controllable, Casambi enabled four channel PWM dimmer for constant voltage LED loads, such as LED strips and constant voltage LED modules. It is connected between a 12-24 VDC power supply and the constant voltage LED load. CBU-PWM4can control up to four channels making it an ideal partner for RGBW and tunable white (TW) applications. The maximum combined output current is 6 A which can be freely divided between 1 -4 channels. CBU-PWM4 is protected against overvoltage, overcurrent and short circuit situations. CBU-PWM4 can be controlled with Casambi app which can be downloaded free of charge from Apple App Store and Google Play Store.Different Casambi enabled products can be used from a simple one luminaire direct control to a complete and full featured light control system where up to 127 units form automatically an intelligent mesh network.

CBU-ASR is a Bluetooth controllable, Casambi enabled two channel 0-10V controller for dimmable LED loads and luminaires. It is powered by an external 12-24 VDC Class 2 power supply. CBU-ASR can control two channels making it an ideal partner for tunable white (TW) applications. The two channels can be configured also to operate individually. The device also has a control port for an external relay and a sensor input. CBU-ASR is an ideal partner for power packs with line voltage relays. CBU-ASR is protected against overvoltage, overcurrent and short circuit situations. CBU-ASR together with other Casambi enabled products can be used from a simple one luminaire direct control to a complete and full featured light control system where up to 127 units form automatically an intelligent mesh network. Casambi supports nearly unlimited number of mesh networks in an installation site. Casambi system can be controlled with Casambi app which can be downloaded free of charge from Apple App Store and Google Play Store. Other controlling methods are, for example, timers, Casambi enable sensors, such as PIR/occupancy and lux sensors, as well as Casambi Xpress and EnOcean switches.

Xpress is a wireless user interface that can be configured via the Casambi app. The four target buttons can control a scene or an animation of the user's choice or simply one luminaire, one luminaire group or all lamps together if so desired. Xpress has buttons for dimming. By once tapping the 'dim down' button the chosen luminaire or luminaire group will go to 0%. When the 'dim up' button is once tapped the luminaire or luminaire group will instead go to 100%. By holding one of the dim-buttons the luminaire or luminaire group will dim smoothly. Xpress has also up/down buttons that can either control the colour temperature if the luminaire in question has a tunable white- option or the up/down ratio if the luminaire in question has vertical control options. For the colour temperature control a tap on the 'up' button will set the colour temperature to the luminaire's warmest colour level as well as a tap on the 'down' button to the coldest colour level. By holding the buttons the colour temperature will change smoothly in steps of 25 Kelvin. For the vertical control the 'up' button will dim the indirect lighting up and the direct lighting down, while the 'down' button will dim the direct lighting up and the indirect lighting down. The sum of the indirect and direct ratio is always 100%. Xpress comes with a wall mounting plate. The switch can be attached to the plate as it is equipped with magnets.

Xpress is a wireless user interface that can be configured via the Casambi app. The four target buttons can control a scene or an animation of the user's choice or simply one luminaire, one luminaire group or all lamps together if so desired. Xpress has buttons for dimming. By once tapping the 'dim down' button the chosen luminaire or luminaire group will go to 0%. When the 'dim up' button is once tapped the luminaire or luminaire group will instead go to 100%. By holding one of the dim-buttons the luminaire or luminaire group will dim smoothly. Xpress has also up/down buttons that can either control the colour temperature if the luminaire in question has a tunable white- option or the up/down ratio if the luminaire in question has vertical control options. For the colour temperature control a tap on the 'up' button will set the colour temperature to the luminaire's warmest colour level as well as a tap on the 'down' button to the coldest colour level. By holding the buttons the colour temperature will change smoothly in steps of 25 Kelvin. For the vertical control the 'up' button will dim the indirect lighting up and the direct lighting down, while the 'down' button will dim the direct lighting up and the indirect lighting down. The sum of the indirect and direct ratio is always 100%. Xpress comes with a wall mounting plate. The switch can be attached to the plate as it is equipped with magnets.