Home > Brands > Casambi

Lighting control for the modern world

The most robust, cost effective and future-proof wireless lighting control solution.

Sort By:
Page of 1
Casambi CBU-TED BLE Wireless - Casambi CBU-TED Bluetooth Controller Casambi CBU-TED Bluetooth Controller

Installation Make sure that the mains voltage is switched off when making any connections. Use 0,51,5 mm2 solid or stranded conductor electrical wires. Strip the wire 6-8 mm from the end.

Press the buttons on top of the dimmer case and insert the wires to the corresponding holes. Make sure to connect the input and output correctly. Input connector is marked with letters L and N, while the output connector is marked with letter N and a symbol with a wave and an arrow ( ).

If you install the dimmer into a heat sensitive environment (i.e. inside a luminaire or in a ceiling outlet box above a luminaire), make sure that the ambient temperature does not exceed the specified maximum value. Using the dimmer in a heat sensitive environment may limit the maximum output power

Our Price: $49.00
BLE Wireless Controls - Casambi CBU-DCS Bluetooth Controller Casambi CBU-DCS Bluetooth Controller

CBU-DCS is a Bluetooth controllable, Casambi enabled DALI controller. CBU-DCS does not have its own power supply. Instead, it is powered directly from a DALI bus. CBU-DCS can be used with a DALI sensor for presence detection or daylight harvesting, or it can be used for controlling DALI drivers that have an integrated DALI bus power supply. When used with drivers it supports range of options, including Device Type 6, Device Type 8, Tunable white control and RGB control. CBU-DCS has two sets of connectors. These connectors are internally connected in parallel with each other. This way the DALI bus can be routed through the product for easy installation. The Casambi app can be downloaded free of charge from Apple App Store and Google Play Store. Different Casambi enabled products can be used as a simple one luminaire direct control to a complete and full featured light control system where up to 127 units form automatically an intelligent mesh network.

Our Price: $49.00
BLE Wireless LED Drivers for Dimming Method - BT-L2C1 LED Lighting eldoLED Casambi BT-L2C1

eldoLED Quality of Light, wireless lighting control through Casambi, and Bluetooth Low Energy (BLE) beaconing from one digitally
integrated BLE radio-LED driver package! The radio's LEDcode2 connection allows for easy, 2-wire digital integration with eldoLED
LED drivers in a luminaire system. The radio - LED driver combination enables seamless integration in a Casambi BLE lighting control
flood network.
Integration and certification is easy thanks to the 2-wire, lowvoltage LEDcode2 connection.

Our Price: $50.00
BLE Wireless LED Drivers - BT-L2C1 Two Channel Dimming LED Lighting eldoLED Casambi BT-L2C1 Two Channel Dimming of Intensity

eldoLED Quality of Light, wireless lighting control through Casambi, and Bluetooth Low Energy (BLE) beaconing from one digitally
integrated BLE radio-LED driver package! The radio's LEDcode2 connection allows for easy, 2-wire digital integration with eldoLED
LED drivers in a luminaire system. The radio - LED driver combination enables seamless integration in a Casambi BLE lighting control
flood network.
Integration and certification is easy thanks to the 2-wire, lowvoltage LEDcode2 connection.

Our Price: $50.00
BLE Wireless LED Drivers - BT-L2C1 LightShape Tunable White eldoLED Casambi BT-L2C1 LightShape Tunable White, two channel control for dimming and CCT

eldoLED Quality of Light, wireless lighting control through Casambi, and Bluetooth Low Energy (BLE) beaconing from one digitally
integrated BLE radio-LED driver package! The radio's LEDcode2 connection allows for easy, 2-wire digital integration with eldoLED
LED drivers in a luminaire system. The radio - LED driver combination enables seamless integration in a Casambi BLE lighting control
flood network.
Integration and certification is easy thanks to the 2-wire, lowvoltage LEDcode2 connection.

Our Price: $50.00
Casambi CBU-A2D Casambi CBU-A2D Bluetooth Controller

CBU-A2D is a Bluetooth controllable, Casambi enabled 2 channel 0-10V/DALI controller. CBU-A2D has a universal 100-277 VAC input voltage range.

Our Price: $55.00
Casambi Brand - Casambi CBU-PWM4 Bluetooth Controller LED Lighting Casambi CBU-PWM4 Bluetooth Controller

CBU-PWM4 is a Bluetooth controllable, Casambi enabled four channel PWM dimmer for constant voltage LED loads, such as LED strips and constant voltage LED modules. It is connected between a 12-24 VDC power supply and the constant voltage LED load. CBU-PWM4can control up to four channels making it an ideal partner for RGBW and tunable white (TW) applications. The maximum combined output current is 6 A which can be freely divided between 1 -4 channels. CBU-PWM4 is protected against overvoltage, overcurrent and short circuit situations. CBU-PWM4 can be controlled with Casambi app which can be downloaded free of charge from Apple App Store and Google Play Store.Different Casambi enabled products can be used from a simple one luminaire direct control to a complete and full featured light control system where up to 127 units form automatically an intelligent mesh network.

Our Price: $60.00
Casambi CBU-ASR Bluetooth Controller - CBU-ASR 2ch 0-10V Casambi CBU-ASR Bluetooth Controller

CBU-ASR is a Bluetooth controllable, Casambi enabled two channel 0-10V controller for dimmable LED loads and luminaires. It is powered by an external 12-24 VDC Class 2 power supply. CBU-ASR can control two channels making it an ideal partner for tunable white (TW) applications. The two channels can be configured also to operate individually. The device also has a control port for an external relay and a sensor input. CBU-ASR is an ideal partner for power packs with line voltage relays. CBU-ASR is protected against overvoltage, overcurrent and short circuit situations. CBU-ASR together with other Casambi enabled products can be used from a simple one luminaire direct control to a complete and full featured light control system where up to 127 units form automatically an intelligent mesh network. Casambi supports nearly unlimited number of mesh networks in an installation site. Casambi system can be controlled with Casambi app which can be downloaded free of charge from Apple App Store and Google Play Store. Other controlling methods are, for example, timers, Casambi enable sensors, such as PIR/occupancy and lux sensors, as well as Casambi Xpress and EnOcean switches.

Our Price: $65.00
BLE Control - Casambi Xpress LED Bluetooth Wall Remote Control (Black) Casambi Xpress LED Bluetooth Wall Remote Control- Black

Xpress is a wireless user interface that can be configured via the Casambi app. The four target buttons can control a scene or an animation of the user's choice or simply one luminaire, one luminaire group or all lamps together if so desired. Xpress has buttons for dimming. By once tapping the 'dim down' button the chosen luminaire or luminaire group will go to 0%. When the 'dim up' button is once tapped the luminaire or luminaire group will instead go to 100%. By holding one of the dim-buttons the luminaire or luminaire group will dim smoothly. Xpress has also up/down buttons that can either control the colour temperature if the luminaire in question has a tunable white- option or the up/down ratio if the luminaire in question has vertical control options. For the colour temperature control a tap on the 'up' button will set the colour temperature to the luminaire's warmest colour level as well as a tap on the 'down' button to the coldest colour level. By holding the buttons the colour temperature will change smoothly in steps of 25 Kelvin. For the vertical control the 'up' button will dim the indirect lighting up and the direct lighting down, while the 'down' button will dim the direct lighting up and the indirect lighting down. The sum of the indirect and direct ratio is always 100%. Xpress comes with a wall mounting plate. The switch can be attached to the plate as it is equipped with magnets.

Our Price: $109.00
Casambi Xpress LED Bluetooth Wall Remote Control (White) Casambi Xpress LED Bluetooth Wall Remote Control- White

Xpress is a wireless user interface that can be configured via the Casambi app. The four target buttons can control a scene or an animation of the user's choice or simply one luminaire, one luminaire group or all lamps together if so desired. Xpress has buttons for dimming. By once tapping the 'dim down' button the chosen luminaire or luminaire group will go to 0%. When the 'dim up' button is once tapped the luminaire or luminaire group will instead go to 100%. By holding one of the dim-buttons the luminaire or luminaire group will dim smoothly. Xpress has also up/down buttons that can either control the colour temperature if the luminaire in question has a tunable white- option or the up/down ratio if the luminaire in question has vertical control options. For the colour temperature control a tap on the 'up' button will set the colour temperature to the luminaire's warmest colour level as well as a tap on the 'down' button to the coldest colour level. By holding the buttons the colour temperature will change smoothly in steps of 25 Kelvin. For the vertical control the 'up' button will dim the indirect lighting up and the direct lighting down, while the 'down' button will dim the direct lighting up and the indirect lighting down. The sum of the indirect and direct ratio is always 100%. Xpress comes with a wall mounting plate. The switch can be attached to the plate as it is equipped with magnets.

Our Price: $109.00
   
 
Bluetooth Low Energy

The Casambi solution is based on Bluetooth Low Energy, the state-of-the-art wireless technology and the only low power wireless technology in all modern smartphones, tablets and even smart watches, making it the only mainstream and future proof low power radio technology in the world.

Bluetooth Low Energy was developed at Nokia Research Center where both Timo and Elena worked. That's why Casambi has had the unique advantage in realising the potential of Bluetooth Low Energy early on. Casambi started the development of the solution before there were any Bluetooth Low Energy devices on the market.

Wireless Mesh Network

On top of Bluetooth Low Energy, the Casambi technology provides a mesh network where all the intelligence of the system is replicated in every node and, in such a way, creates a system with no single points of failure.





Such self-organizing wireless mesh network can control a large number of fixtures from any point. It also allows for firmware updates over the network, allowing any kind of changes to be made over-the-air. In this kind of fully distributed and symmetric architecture, any unit can go offline and catch up from others when they return back online.

The Casambi devices are smart on their own and only connected when needed. An Internet connection is not necessary for normal operation, it is just needed for user interface configurations to be sent or recalled from the cloud service.
App

The Casambi app works as one of the user interfaces in a Casambi lighting control solution, as the commissioning tool and as well as a remote gateway. The Casambi app works with iOS as well as Android devices, like smartphones, tablets and smartwatches. The app is free to download by any end user.

The Casambi app is made by user interface experts and in a way, that anyone - regardless of technical proficiency- can use it. The Casambi lighting control technology gives a possibility for Casambi's partners to implement and develop anything needed for a full featured lighting control system, but the Casambi app only shows in the user interface the functionality that is relevant to that particular installation. Therefore, the Casambi app is equally well suitable for the professional lighting market as well as the residential field.

User Interfaces

Casambi offers a big variety of possibilities for a user to interact with the lighting depending on the user's individual requirements. The app for smartphones, tablets and smartwatches is the most elaborated user interface. Besides the app, traditional wall switches, push buttons, Casambi's own scene controllers and many other control points can be used.

Thanks to the Casambi bluetooth module and the versatile customizable software, all of Casambi's partners can develop their own user interfaces for a Casambi lighting control system. All of the partner products are compatible with each other as well as with all Casambi's native products.

Have a question about Casambi products? Contact us now!

Send a Message

- OR -

Call 407-777-0942