LED Drivers

ECOdrive, 30W, DALI-2, 1 control channel, constant current, 1x 55V output, side feed, plastic long

ECOdrive, 50W, 0-10V, 1 control channel, constant current, 1x 55V output, side feed, square metal

Product Code - EC0561S

Installation Make sure that the mains voltage is switched off when making any connections. Use 0,51,5 mm2 solid or stranded conductor electrical wires. Strip the wire 6-8 mm from the end.

Press the buttons on top of the dimmer case and insert the wires to the corresponding holes. Make sure to connect the input and output correctly. Input connector is marked with letters L and N, while the output connector is marked with letter N and a symbol with a wave and an arrow ( ).

If you install the dimmer into a heat sensitive environment (i.e. inside a luminaire or in a ceiling outlet box above a luminaire), make sure that the ambient temperature does not exceed the specified maximum value. Using the dimmer in a heat sensitive environment may limit the maximum output power

CBU-DCS is a Bluetooth controllable, Casambi enabled DALI controller. CBU-DCS does not have its own power supply. Instead, it is powered directly from a DALI bus. CBU-DCS can be used with a DALI sensor for presence detection or daylight harvesting, or it can be used for controlling DALI drivers that have an integrated DALI bus power supply. When used with drivers it supports range of options, including Device Type 6, Device Type 8, Tunable white control and RGB control. CBU-DCS has two sets of connectors. These connectors are internally connected in parallel with each other. This way the DALI bus can be routed through the product for easy installation. The Casambi app can be downloaded free of charge from Apple App Store and Google Play Store. Different Casambi enabled products can be used as a simple one luminaire direct control to a complete and full featured light control system where up to 127 units form automatically an intelligent mesh network.

ECOdrive, 50W, DALI-2, 1 control channel, constant current, 1x 55V output, side feed, square metal

ECOdrive, 50W, 0-10V, 1 control channel, constant current, 1x 55V output, side feed, square metal/plastic

SOLOdrive AC, 50W, 0-10V, 1 control channel, constant current, 2x 55V output, side feed, square metal/plastic

SOLOdrive AC, 50W, 0-10V, 1 control channel, constant current, 2x 55V outputs, square metal

(1)

eldoLED Quality of Light, wireless lighting control through Casambi, and Bluetooth Low Energy (BLE) beaconing from one digitally
integrated BLE radio-LED driver package! The radio's LEDcode2 connection allows for easy, 2-wire digital integration with eldoLED
LED drivers in a luminaire system. The radio - LED driver combination enables seamless integration in a Casambi BLE lighting control
flood network.
Integration and certification is easy thanks to the 2-wire, lowvoltage LEDcode2 connection.

eldoLED Quality of Light, wireless lighting control through Casambi, and Bluetooth Low Energy (BLE) beaconing from one digitally
integrated BLE radio-LED driver package! The radio's LEDcode2 connection allows for easy, 2-wire digital integration with eldoLED
LED drivers in a luminaire system. The radio - LED driver combination enables seamless integration in a Casambi BLE lighting control
flood network.
Integration and certification is easy thanks to the 2-wire, lowvoltage LEDcode2 connection.

eldoLED Quality of Light, wireless lighting control through Casambi, and Bluetooth Low Energy (BLE) beaconing from one digitally
integrated BLE radio-LED driver package! The radio's LEDcode2 connection allows for easy, 2-wire digital integration with eldoLED
LED drivers in a luminaire system. The radio - LED driver combination enables seamless integration in a Casambi BLE lighting control
flood network.
Integration and certification is easy thanks to the 2-wire, lowvoltage LEDcode2 connection.

ECOdrive, 50W, DALI-2, 1 control channel, constant current, 1x 55V output, side feed, square metal/plastic

ECOdrive, 30W, 0-10V, 1 control channel, constant current, 1x 55V output, side feed, plastic long

ECOdrive, 10W, 0-10V, 1 control channel, constant current, 1x 55V output,
bottom feed, metal square

ECOdrive, 10W, 0-10V, 1 control channel, constant current, 1x 55V output,
Side feed, metal square

ECOdrive, 20W, 0-10V + AUX, 1 control channel, constant current, 1x 55V output, side feed, long metal

Datasheet EC0361B

ECOdrive, 30W, 0-10V, 1 control channel, constant current, 1x 55V output, side feed, metal square

ECOdrive, 30W, 0-10V + AUX, 1 control channel, constant current, 1x 55V output, side feed, long metal

Product Code: EC0366L

ECOdrive AC, 30W, 0-10V+aux, constant current, 1x 55V output, flying leads, long metal

Product Code: EC0366M

ECOdrive AC, 50W, 0-10V, constant current, 1x 55V output, flyingleads, long metal

EC0561M2

(3)

eldoLED

(1)

ECOdrive AC, 50W, 0-10V+aux, constant current, 1x 55V output, flying leads, long metal

Product Code - EC0566M

ECOdrive, 50W, 0-10V + AUX, 1 control channel, constant current, 1x 55V output, side feed, long metal

ECOdrive AC, 30W, 0-10V, constant current, 1x 55V output, flying leads, long metal

(1)

ECOdrive, 20W, 0/10V, 1 control channel, constant current, 1x 55V output,
Bottom feed, metal square

ECOdrive, 50W, 0-10V, 1 control channel, constant current, 1x 55V output,bottom feed, square metal/plastic

LINEARdrive DC, 8A, 12-24VDC, 0-10V, 1 control channel, constant voltage, 2x LED outputs, plastic long

Product Code: LIN211D1-LIN, LIN211D1-LOG

LINEARdrive DC, 8A, 12-24VDC, DMX, 1 control channel, constant voltage, 2x LED outputs, plastic long